Image 1 of 1
Image 1 of 1
Image 1 of 1
Image 1 of 1
FOAM CANNON RATED FOR UP TO 3200 PSI
High-foaming foam cannon designed for use with pressure washers to deliver thick, clingy suds for faster, safer vehicle washing. Constructed with a durable, chemical-resistant bottle and a heavy-duty brass nozzle, the cannon mixes concentrated soap with pressurized water to produce a dense foam blanket that lifts dirt and grime from paint surfaces without aggressive scrubbing.
Features:
Universal pressure washer compatibility with adjustable nozzle and quick-connect fittings for common 1/4" or M22 wands (verify fit for your model).
Adjustable foam concentration and spray pattern controls: fine-tune soap-to-water ratio and switch from narrow stream to wide fan for targeted or full-coverage application.
Durable components: tough polyethylene bottle resists cracking and staining; brass and stainless-metal fittings reduce corrosion and wear.
High-capacity bottle reduces frequent refills and supports concentrated formulas.
Easy to use: attach to pressure washer wand, fill with diluted foam soap per product instructions, adjust mixing knob, and spray—foam clings to vertical surfaces for extended dwell time.
Benefits:
Reduces contact-based scratches by loosening dirt and contaminants before mitt or brush contact.
Speeds up pre-wash and reduces labor time on large vehicles or heavy soils.
Economical soap use thanks to adjustable dilution control.
Compatible with a wide range of pH-balanced car wash soaps and newer waterless/low-water formulas.
Use recommendations:
Rinse vehicle first to remove loose grit.
Use a car-specific foaming soap at manufacturer-recommended dilution.
Apply foam from top down, allow 3–5 minutes dwell (avoid drying), then rinse and follow with two-bucket wash if desired.
Rinse and store dry; periodically inspect seals and fittings.
This foam cannon is suitable for hobbyists and professional detailers seeking improved cleaning performance and paint protection during wash routines.
FOAM CANNON RATED FOR UP TO 3200 PSI
High-foaming foam cannon designed for use with pressure washers to deliver thick, clingy suds for faster, safer vehicle washing. Constructed with a durable, chemical-resistant bottle and a heavy-duty brass nozzle, the cannon mixes concentrated soap with pressurized water to produce a dense foam blanket that lifts dirt and grime from paint surfaces without aggressive scrubbing.
Features:
Universal pressure washer compatibility with adjustable nozzle and quick-connect fittings for common 1/4" or M22 wands (verify fit for your model).
Adjustable foam concentration and spray pattern controls: fine-tune soap-to-water ratio and switch from narrow stream to wide fan for targeted or full-coverage application.
Durable components: tough polyethylene bottle resists cracking and staining; brass and stainless-metal fittings reduce corrosion and wear.
High-capacity bottle reduces frequent refills and supports concentrated formulas.
Easy to use: attach to pressure washer wand, fill with diluted foam soap per product instructions, adjust mixing knob, and spray—foam clings to vertical surfaces for extended dwell time.
Benefits:
Reduces contact-based scratches by loosening dirt and contaminants before mitt or brush contact.
Speeds up pre-wash and reduces labor time on large vehicles or heavy soils.
Economical soap use thanks to adjustable dilution control.
Compatible with a wide range of pH-balanced car wash soaps and newer waterless/low-water formulas.
Use recommendations:
Rinse vehicle first to remove loose grit.
Use a car-specific foaming soap at manufacturer-recommended dilution.
Apply foam from top down, allow 3–5 minutes dwell (avoid drying), then rinse and follow with two-bucket wash if desired.
Rinse and store dry; periodically inspect seals and fittings.
This foam cannon is suitable for hobbyists and professional detailers seeking improved cleaning performance and paint protection during wash routines.