Foam cannon soap is a concentrated car wash detergent formulated to produce thick, clingy foam when used with a foam cannon or foam gun. Designed to safely lift and encapsulate dirt, road grime, and contaminants from vehicle surfaces, it reduces the need for aggressive scrubbing and lowers the risk of swirl marks and scratches. Typical characteristics include high lubricity, strong foaming action, strong PH formula.
Key benefits:
Thick, long-lasting foam that clings to vertical surfaces for improved dwell time.
Superior lubrication to minimize contact friction during mitt or brush use.
Effective at loosening dirt, brake dust, and light oils before the rinse stage.
Safe for use on paint, glass, plastic trim, wheels.
Concentrated formula for economical dilution rates and customizable foam strength.
How to use:
Dilute the soap according to the product label. Common dilution ratio is 2-4oz soap to 30oz water.
Fill the foam cannon reservoir with the diluted solution and attach it to a pressure washer or compatible sprayer.
Apply foam from top to bottom, covering one panel at a time and allowing the foam to dwell briefly (typically 1–3 minutes) without allowing it to dry.
Agitate gently with a microfiber wash mitt if needed, then rinse thoroughly with high-pressure water.
Dry with a microfiber towel or blow-off tool to prevent water spots.
Foam cannon soap is a concentrated car wash detergent formulated to produce thick, clingy foam when used with a foam cannon or foam gun. Designed to safely lift and encapsulate dirt, road grime, and contaminants from vehicle surfaces, it reduces the need for aggressive scrubbing and lowers the risk of swirl marks and scratches. Typical characteristics include high lubricity, strong foaming action, strong PH formula.
Key benefits:
Thick, long-lasting foam that clings to vertical surfaces for improved dwell time.
Superior lubrication to minimize contact friction during mitt or brush use.
Effective at loosening dirt, brake dust, and light oils before the rinse stage.
Safe for use on paint, glass, plastic trim, wheels.
Concentrated formula for economical dilution rates and customizable foam strength.
How to use:
Dilute the soap according to the product label. Common dilution ratio is 2-4oz soap to 30oz water.
Fill the foam cannon reservoir with the diluted solution and attach it to a pressure washer or compatible sprayer.
Apply foam from top to bottom, covering one panel at a time and allowing the foam to dwell briefly (typically 1–3 minutes) without allowing it to dry.
Agitate gently with a microfiber wash mitt if needed, then rinse thoroughly with high-pressure water.
Dry with a microfiber towel or blow-off tool to prevent water spots.
