Wheel and Grill Acid is a concentrated, fast-acting acid cleaner formulated to remove heavy brake dust, road grime, rust stains, and baked-on carbon from wheels, wheel wells, lug nuts, and exterior metal surfaces such as grills and exhaust tips. Designed for professional detailers and serious DIYers, this product delivers powerful cleaning performance while minimizing dwell time and scrubbing.
Key features
Concentrated acid formula that quickly dissolves iron deposits, mineral buildup, and stubborn oxidation.
Effective on a wide range of metals and finishes commonly found on wheels and grills when used as directed.
Fast-acting — reduces labor and scrubbing compared with all-purpose cleaners.
Clear, rinseable formula that leaves surfaces ready for polishing or protection.
Available in multiple sizes for shop or retail use.
Benefits
Restores appearance by removing embedded contaminants that other cleaners leave behind.
Saves time with rapid breakdown of brake dust and rust particles.
Prepares metal surfaces for coating, polishing, or painting by delivering a clean, contaminant-free surface.
Concentrated formulation allows dilution to match the level of soil for economical use.
Directions for use
Always test on a small, inconspicuous area first to confirm compatibility with the surface and finish.
Wear appropriate personal protective equipment: acid-resistant gloves and eye protection.
Dilute according to soil level and manufacturer guidance. For heavy contamination, use stronger dilution or full strength as recommended; for light cleaning, use a higher dilution.
Apply evenly to cool, dry surfaces. Do not apply to hot surfaces or in direct sunlight.
Allow product to dwell briefly — do not let it dry. Agitate with a soft brush if needed.
Rinse thoroughly with clean water until all residue is removed.
Dry and inspect. Repeat if necessary.
Safety and precautions
Corrosive product. Avoid contact with skin, eyes, painted surfaces, rubber, and aluminum alloys unless product labeling specifies compatibility.
Use only with proper ventilation and PPE. In case of contact with skin or eyes, flush immediately with water and seek medical attention if needed.
Keep out of reach of children.
Follow all label instructions and local regulations regarding storage, handling, and disposal.
Packaging and storage
Store in original, labeled containers away from heat and direct sunlight.
Keep containers tightly closed when not in use.
This product is intended for professional and instructed consumer use. Always follow the full label directions for safe and effective results.
Wheel and Grill Acid is a concentrated, fast-acting acid cleaner formulated to remove heavy brake dust, road grime, rust stains, and baked-on carbon from wheels, wheel wells, lug nuts, and exterior metal surfaces such as grills and exhaust tips. Designed for professional detailers and serious DIYers, this product delivers powerful cleaning performance while minimizing dwell time and scrubbing.
Key features
Concentrated acid formula that quickly dissolves iron deposits, mineral buildup, and stubborn oxidation.
Effective on a wide range of metals and finishes commonly found on wheels and grills when used as directed.
Fast-acting — reduces labor and scrubbing compared with all-purpose cleaners.
Clear, rinseable formula that leaves surfaces ready for polishing or protection.
Available in multiple sizes for shop or retail use.
Benefits
Restores appearance by removing embedded contaminants that other cleaners leave behind.
Saves time with rapid breakdown of brake dust and rust particles.
Prepares metal surfaces for coating, polishing, or painting by delivering a clean, contaminant-free surface.
Concentrated formulation allows dilution to match the level of soil for economical use.
Directions for use
Always test on a small, inconspicuous area first to confirm compatibility with the surface and finish.
Wear appropriate personal protective equipment: acid-resistant gloves and eye protection.
Dilute according to soil level and manufacturer guidance. For heavy contamination, use stronger dilution or full strength as recommended; for light cleaning, use a higher dilution.
Apply evenly to cool, dry surfaces. Do not apply to hot surfaces or in direct sunlight.
Allow product to dwell briefly — do not let it dry. Agitate with a soft brush if needed.
Rinse thoroughly with clean water until all residue is removed.
Dry and inspect. Repeat if necessary.
Safety and precautions
Corrosive product. Avoid contact with skin, eyes, painted surfaces, rubber, and aluminum alloys unless product labeling specifies compatibility.
Use only with proper ventilation and PPE. In case of contact with skin or eyes, flush immediately with water and seek medical attention if needed.
Keep out of reach of children.
Follow all label instructions and local regulations regarding storage, handling, and disposal.
Packaging and storage
Store in original, labeled containers away from heat and direct sunlight.
Keep containers tightly closed when not in use.
This product is intended for professional and instructed consumer use. Always follow the full label directions for safe and effective results.
